Software modules description
Here you can find information for every software module - what memory device have to read from immobox, expected lenght of readed file, what transponder have to be used, is transponder ready to start car or have to be matched using diagnostic device and PIN code. Some modules like 30,31,36,39,44,57,102,103,146,152 do not need files or they can be used in 2 ways - with or without file information.
Toyota immobox with ID33
Memory device is serial eeprom 24c04 DIL8 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
MAN TGA module FFR
Memory device is serial eeprom, which can be either 25c128 or 25c256, both SMD8 package.
Expected file size is 16384 or 32768 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the truck.
Porsche body module with ID13
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Software shows PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
General Motors GM Passkey3 immobox Delphi
Memory device is Motorola MCU MC68HC908AS20 PLCC52 package.
Expected file size is 512 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Acura immobox
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Renault UCH Johnson Controls type
This module can be used in 2 ways:
1. If you don`t know 12-digit PIN code: Memory device is serial eeprom 95c080 SMD8 package.
Expected file size is 1024 bytes.Module calculates PIN code.
Use TMPro chip or PCF7936 or Silca T14 – JMA TP12 transponder.
If you use PCF7936 written transponder have to be matched with car using diagnostic device, if you use TMPro chip – no need.
2. If you know 12-digit PIN code:Start software and select module.
Insert PCF7936 or Silca T14 – JMA TP12 transponder. Press PROG button.
Software opens box, where you must enter 12-digit PIN code.Verify it and press OK.
Match prepared transponder with car using diagnostic device and PIN code.
Ducati bikes dashboard Marelli
Memory device is serial eeprom 24c02 or 24c16 SMD8 package.
Expected file size is 256 or 2048 bytes.
Softwae shows 5-digit PIN code.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Software shows 5-digit PIN code.
Fiat Grande Punto BSI Delphi
Memory device is serial eeprom 93c86 SMD8 package or NEC MCU.
For serial eeprom 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 using Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
Software shows 5-digit PIN code
Written transponder is ready programmed to start the vehicle.
Note:for files read by OBD2 from NEC MCU software shows PIN code and prepares keys but does not create new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Polonez immobox Megamos
Memory device is serial eeprom 93c46 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.
Tata Safari immobox Alltech
Memory device is serial eeprom 24c01 SMD8 package.
Expected file size is 128 bytes.
Use TMPro chip or T5 transponder.
Written transponder is ready programmed to start the vehicle.