Ford

Volkswagen, Skoda, Seat IMMO1 immobox Siemens

Memory device is Motorola MCU MC68HC05B16 PLCC52 package.

Expected file size is 256 bytes. 

Software shows PIN code.

Use TMPro chip or T5 transponder.

Written transponder is ready programmed to start the vehicle.

Volkswagen, Seat IMMO2 immobox Siemens

Memory device is Texas Instrument MCU TMS370C702 PLCC28 package.

Expected file size is 256 bytes.

Software shows PIN code.

Use PCF7935 or Silca T15 - JMA TP14 transponder.

Written transponder is ready programmed to start the vehicle.

Volkswagen, Seat, Ford IMMO3 immobox Valeo

Memory device is serial eeprom 24c04 or 24c16 both SMD8 package.

Expected file size for 24c04 is 512 bytes , for 24c16 is 2048 bytes. 

Software shows PIN code.

Use PCF7935 or Silca T15 - JMA TP14 transponder.

Written transponder is ready programmed to start the vehicle.

PSA Volkswagen Seat Opel Nissan Ford Mitsubishi new chip

This module can prepare PCF7935 or Silca T15 – JMA TP14 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
Prepared ID40 chips are switable for absolutely all Opel Immo1/Immo2 cars.
Prepared ID41 chips are switable for Nissan NATS 2-4 and some NATS 5 cars.
Prepared ID42/ID44 chips are switable for Volkswagen and Seat Immo1/Immo2 cars with external immoboxes and also for Ford Galaxy.
Prepared ID45 chips are switable for all Peugeot 206/406 with BSI Siemens.

Mazda immobox Temic

Memory device is Motorola MCU MC68HC705P3 SO28 package.

Expected file size is 128 bytes.

Use TMPro chip or T5 transponder.

Written transponder is ready programmed to start the vehicle.

Fiat Grande Punto BSI Delphi

Memory device is serial eeprom 93c86 SMD8 package or NEC MCU.
For serial eeprom 93c86 expected file size is 2048 bytes.
You can read Fiat BSI by OBD2 using Immo tool with Fiat software activation.
For files read by OBD2 expected size is 21 or 32768 or 65536 bytes.
Use TMPro chip or PCF7936 transponder or remote key with PCF7946.
Software shows 5-digit PIN code

Written transponder is ready programmed to start the vehicle.

Note:for files read by OBD2 from NEC MCU software shows PIN code and prepares keys but does not create new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.

Ford engine ECU Delphi

Memory device is serial eeprom 95c160 8 pin SMD package.

Expected file size is 2048 bytes.

Use TMPro chip or K-JMD transponder.

Written transponder is ready programmed to start car.

Ford,Mazda engine ECU Siemens

Memory device is serial eeprom 93c56/93c86 8 pin SMD package.

Expected file size is 256/2048 bytes.

Use TMPro chip or K-JMD transponder.

Written transponder is ready programmed to start car.