Toyota, Lexus, Subaru SMART key unit Denso.
Memory device is serial eeprom 93c66 or 93c86 SMD8 package.
Exected file size for 93c66 is 512 bytes, for 93c86 is 2048 bytes.
Use ONLY ORIGINAL Toyota, Lexus and Subaru keys – DST 40, DST 80 (G-keys) or DST 128 (H-keys).
Programmed key will start vehicle when you put it near START button.
HandsFree function WILL NOT WORK.
To activate it, you must program ANOTHER NEW key by OBD2.
You CANNOT reprogram SAME KEY, that you added to file.
Lexus
Software module 188
Vehicles equipped with this unit:
Toyota: Land Cruiser 200, Land Cruiser Prado, RAV4, Venza, Corolla, Spade, Porte, Vios, Yaris
Lexus: LX 570, GX 460, RX, LS 460, GS, IS
Subaru: Outback, Legacy, Forester, XV Crosstrek
Software module 153
Toyota, Lexus, Peugeot, Citroen immobox with ID 4D-67,4D-68 and 4D-70.
Memory device is serial eeprom 93c56/93c66/24c04 8 pin SMD package.
Expected file size is 256/512 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Toyota:4Runner, Alphard, Auris, Avalon, Avensis, AvensisVerso, Avanza, Aygo, Camry, Corolla, Corolla Verso, Fortuner, Hiace, Highlander, Landcruiser, Prius, Premio, RAV4, Sequoia, Takoma, Tundra, Yaris
Lexus:ES330, ES350, GS300, GS350, GS430, GS450, GS460, GX470, IS220, IS250, IS300,
IS350, LS430, LX470, RX300, RX330, RX350, SC430
Citroen:C1
Peugeot:107
Software module 87
Memory device is serial eeprom, which can be 24c02 or 25c020 or 95c040 or 95c080 or 93c56 or 93c86 – all 8 pin SMD package.
Expected file size for 24c02 , 25c020 and 93c56 is 256 bytes, for 95c040 is 512 bytes, for 25080 is 1024 bytes and for 93c86 is 2048 bytes.
Use TMPro chip or K-JMD transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Toyota: RAV4, Corolla, Sienna, Yaris, MR2
Lexus: IS200, IS300, GS300