Fiat South America immobox Marelli IMM009.10
Memory device is Motorola 9S08DZ32 32-pin SMD package.
You can read Motorola with TMPro, download connection diagram. Software shows 5-digit PIN code.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder.
Written transponder is ready programmed to start car.
Peugeot
Software module 194
Vehicles equipped with this unit:
Fiat: Fiorino Furgao, Palio 2012->, Siena 2012->, Ducato 2012->
Peugeot: Boxer 2012->
Citroen: Jumper 2012->
Software module 168
Peugeot JetForce bike dashboard. Memory device is serial eeprom 95c020 SMD8 package. Expected file size is 256 bytes. Use T5 transponder. Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Peugeot:JetForce
Software module 160
Mitsubishi Outlander immobox with ID46 Memory device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes. Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Mitsubishi:Outlander(2006-),Lancer(2006-)
Peugeot:4007(2008-),5008(2009-)
Software module 153
Toyota,Lexus,Peugeot,Citroen immobox with ID 4D-67,4D-68 and 4D-70 Memory device is serial eeprom 93c56/93c66/24c04 8 pin SMD package. Expected file size is 256/512 bytes. Use JMA TPX2 – Errebi TX2 or CN2/CN5 or K-JMD or YS-01 transponder. Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Toyota:4Runner,Alphard,Auris,Avalon,Avensis,AvensisVerso,Avanza,Aygo,Camry,Corolla,Corolla Verso,Fortuner,Hiace,Highlander, Landcruiser,Prius,Premio,RAV4,Sequoia,Takoma,Tundra,Yaris
Lexus:ES330,ES350,GS300,GS350,GS430,GS450,GS460,GX470,IS220,IS250,IS300,
IS350,LS430,LX470,RX300,RX330,RX350,SC430
Citroen:C1
Peugeot:107
Software module 112
Fiat, Lancia, PSA BSI Marelli type 3.
Memory device is serial eeprom 95c160 SSOP8 package.
Expected file size is 2048 bytes.
Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT: if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Software shows 5-digit PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-), Idea(2008-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-), Musa(2007-)
Software module 63
Key copier for ID33, ID41, ID42, ID44 and ID45 keys
Software helps you to copy crypto keys onto PCF7935 transponder.
You can clone Nissan ID41, VAG ID42, VAG ID44 ,Ford Galaxy ID42, Ford Galaxy ID44 and Peugeot ID45 keys.
For ID45 Peugeot 206/406 keys you can see vehicle PIN code.
Vehicles equipped with this unit:
Software module 59
Fiat Grande Punto BSI Delphi. Memory device is serial eeprom 93c86 SMD8 package or NEC MCU. For serial eeprom 93c86 expected file size is 2048 bytes. You can read Fiat BSI by OBD2 using Immo tool with Fiat software activation. For files read by OBD2 expected size is 21 or 32768 or 65536 bytes. Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key with PCF7946. Software shows 5-digit PIN code. Written transponder is ready programmed to start the vehicle.
Note: for files read by OBD2 from NEC MCU software shows PIN code and prepares keys but does not create new file. You must program prepared keys by OBD2 and PIN code.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT: if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, New 500, Fiorino
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Bipper
Opel: Combo D
Software module 45
Fiat, Lancia, Citroen, Peugeot vans, Iveco vans/trucks CODE2 with BSI Marelli type 2 Memory device is serial eeprom 95c160 or 95c320, both SSOP8 package. For 95c160 expected file size is 2048 bytes, for 95c320 is 4096 bytes. Software shows 5-digit PIN code.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder. Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-)
Iveco: Daily(2007-), Eurocargo(2007-)
Software module 39
PSA Volkswagen Seat Opel Nissan Ford Mitsubishi new chip
This module can prepare PCF7935 or Silca T15 – JMA TP14 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
Prepared ID40 chips are switable for absolutely all Opel Immo1/Immo2 cars.
Prepared ID41 chips are switable for Nissan NATS 2-4 and some NATS 5 cars.
Prepared ID42/ID44 chips are switable for Volkswagen and Seat Immo1/Immo2 cars with external immoboxes and also for Ford Galaxy.
Prepared ID45 chips are switable for all Peugeot 206/406 with BSI Siemens.
Vehicles equipped with this unit:
Software module 33
Peugeot bike engine ECU Marelli Memory device is Motorola MCU MC68HC05B16 QFP64 package. Expected file size is 256 bytes. Use T5 transponder. Written transponder is ready programmed to start bike. Click here to see opened Peugeot bike engine ECU Marelli.
Vehicles equipped with this unit:
Peugeot: Alise, Eliseo, Speedfight
Piaggio: Beverly, Liberty, Vespa, X8