BMW, Mini CAS SiemensVDO
Memory device is Motorola MCU 912DG256 or 9S12DG256 or 9S12XDP512
Expected file size is 2048 or 4096 bytes.
IMPORTANT NOTE: Motorola MCU is locked, not possible to read/write with TMPro.
If job is ALL KEYS LOST and you get message that file is CAS3+:
– if ISN is 16 bytes you need eeprom file read from engine ECU.
– if ISN is 2 bytes it is not possible to make key with TMPro.
If job is SPARE KEY – in all cases you need just CAS file.
For ECU with MPC556 MCU you must read external eeprom 95c640.
For ECU with TRICORE MCU you must read eeprom from TRICORE.
Use PCF7936 transponder or remote key.
Written transponder or remote key is ready programmed to start car.
To activate remote: insert key to turn ignition ON. Remove key. Press any button few times. Repeat these steps till remote starts to work.
If you have got locked CHINESE BMW HITAG2 remote keys, you can UNLOCK them and set as BRAND NEW so you can use them again with any car.
Mini
Software module 130
Vehicles equipped with this unit:
BMW: series 1, series 3, series 5, series 6,X-3, X-5,X-6
Mini: Cooper
Software module 40
BMW, Rover, Mini immobox EWS
Memory device is Motorola MCU MC68HC11EA9 PLCC52 or MC68HC9S12D64 QFP80 package.
IMPORTANT NOTE: Motorola MC68HC9S12D64 and MC68HC11EA9 are LOCKED.Use proper programmer to read them.
For Motorola MCU MC68HC11EA9 PLCC52 package expected file size is 512 bytes.
For MC68HC9S12D64 QFP80 package expected file size is 1024 bytes.
Use PCF7935 or Silca T15 – JMA TP14 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
BMW: series 3(-2002), series 5(-2002), series 7(-2002), series 8(-2002),X-3(-2002), X-5(-2002), M3(-2002), Z3(-2002)
Rover: 75
Mini: Cooper
Landrover:Freelander(2001-2003)