Volkswagen Passat 3C ID46
Memory device is serial eeprom 95c320 8-pin SMD package.
Expected file size is 4096 bytes.
Software shows PIN code.
Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder.
Written transponder is ready programmed to start car.
Note:To activate HF function of key,you must program it by OBD2 and PIN code.
Volkswagen
Software module 216
Vehicles equipped with this unit:
Volkswagen:Passat 3C
Software module 200
Volkswagen, Audi, Porsche KESSY Continental, Siemens-VDO
Memory device is serial eeprom 93c86.
It is MANDATORY to read and write eeprom with TMPro. To read or write eeprom solder 7 wires and leave red wire free. Use option “93c86(200)”. Also it is necessary to connect 12v to KESSY from external power supply. Download connection diagram
Expected file size is 2048 bytes.
Software shows PIN code.
Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or original remote key.
Written transponder is ready programmed to start car.
Remote part is also programmed and work.
Vehicles equipped with this unit:
Volkswagen:Touareg (2008-), Phaeton (2008-)
Audi:A8 (2008-)
Bentley:Continental (2008-)
Porsche:Cayenne (2008-)
Software module 155
Volkswagen,Audi,Porsche,Bentley KESSY SiemensVDO,
Memory device is serial eeprom 93c86 SMD 8 package.
Expected file size is 2048 bytes.
Use PCF7936 or Silca T14 – JMA TP12 or CN3 transponder or remote key with PCF7946.
Module also shows PIN code.
If you use PCF7936 or remote key with PCF7946 you must match programmed key to car with diagnostic device, if you use CN3 – no need.
Vehicles equipped with this unit:
Audi:A8
Volkswagen:Touareg,Phaeton
Porsche:Cayenne
Bentley:Continental
Software module 152
VW Seat Skoda Audi new CAN transponder.
Module precodes common ID48 transponder into JMA TP22 for Seat, JMA TP23 for Volkswagen, JMA TP24 for Skoda and JMA TP25 for Audi.
After precoding you have to match precoded transponder to car with diagnostic tool and PIN code.
Vehicles equipped with this unit:
Software module 150
Volkswagen, Audi,Seat,Skoda CAN dashboard Siemens-VDO.
This software module needs 2 files – from Micronas MCU and from serial eeprom.
IMPORTANT NOTE: Micronas MCU is LOCKED. TMPro cannot read flash from it. You need other programmer.
For Micronas expected file sizes are 524288 and 1048576 bytes. For eeprom 24c16 expected file size is 2048 bytes,for eeprom 24c32 expected file size is 4096 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder. Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Volkswagen:Golf 5, Caddy, Eos, CrossGolf, Jetta, Touran
Seat:Alhambra, Altea, Leon, Toledo
Audi:A3
Skoda:Octavia II, Scout
Software module 149
Volkswagen Passat 3C comfort with ID48
Memory device is serial eeprom 95c320.
Use Megamos Crypto or Silca T6 – JMA TP08 or TS48 or CN6 or KD48 transponder.
Written transponder is ready programmed to start the vehicle.
Software shows PIN code.
Vehicles equipped with this unit:
Volkswagen: Passat 3C
Software module 146
Volkswagen Audi Seat Skoda ID48 dealer key CAN This software offers to you 2 option of using:
1 - Use any OBD2 tool,that can extract 7 bytes of component security from car unit or extract them from ECU eeprom file.Run software,press PROG and select car manifacturer.Enter component security bytes.Module will prerare dealer key ready for programming with diagnostic device and PIN code.
2 - If you have working key,and you can extract at least 6 bytes component security from engine ECU,you can search for 7-th byte using working key and to prepare new dealer key.Go to TOOLS and select this option.Enter car manifacturer and 6 bytes of CS.Software will search for 7-th byte.When searching completed,remove original key,insert key with blank ID48 or Silca T6 - JMA TP08,press OK and dealer key will be prepared.
You can select between standard ID48 and TS48 copy transponder.If you select ID48, you will get dealer key ready for programming with diagnostic device and PIN code.If you select TS48, you will get full copy of original key ready to start car.
Vehicles equipped with this unit:
Software module 39
PSA Volkswagen Seat Opel Nissan Ford Mitsubishi new chip
This module can prepare PCF7935 or Silca T15 – JMA TP14 transponders, so they become ready to be matched with particular car using diagnostic device and PIN code.
Prepared ID40 chips are switable for absolutely all Opel Immo1/Immo2 cars.
Prepared ID41 chips are switable for Nissan NATS 2-4 and some NATS 5 cars.
Prepared ID42/ID44 chips are switable for Volkswagen and Seat Immo1/Immo2 cars with external immoboxes and also for Ford Galaxy.
Prepared ID45 chips are switable for all Peugeot 206/406 with BSI Siemens.
Vehicles equipped with this unit:
Software module 32
Mercedes Sprinter, Vito immobox Temic Memory device is Motorola MCU, which can be either MC68HC05X16 or MC68HC908AZ32, both QFP64 package.For MC68HC05X16 expected file size is 256 bytes, for MC68HC908AZ32 expected file size is 512 or 1024 bytes. Use T5 transponder. Written transponder is ready programmed to start the vehicle.
Note: if immobox contain RF receiver in metal box, this means that original key had remote function.In this case you have also to perform START ERROR repair.
Important note: if Motorola MCU is MC68HC05X16 - eeprom area is locked, you have to use proper programmer to read it.
Vehicles equipped with this unit:
Mercedes: Sprinter(1998-2006), Vito(1998-2006)
VW: LT28(2000-), LT35(2000-)
Software module 24
VW, Seat, Ford IMMO3 immobox Valeo Memory device is serial eeprom 24c04 or 24c16 both SMD8 package. Expected file size for 24c04 is 512 bytes , for 24c16 is 2048 bytes. Software shows PIN code. Use PCF7935 or Silca T15 - JMA TP14 transponder. Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
VW: Lupo(2000-2002), Polo(2000-2002), Transporter(2000-2002)
Seat: Arosa(2000-2002), Alhambra(2000-2002), Inca(2000-2002)
Ford: Galaxy(2000-2002)